Products

Products

Products

ET

Scope of use: accumulation and storage of heated water.

Product material: carbon steel.

Description: – The tank is designed to accumulate heat from various sources, as well as to create multivalent heating systems (i.e. if you need joint operation of several heat sources, e.g. you want to combine a solid fuel and electric boiler, or a gas-fired and wood boiler, or a thermal pump and both solid fuel and electric boiler etc.). The S-TANK ET series tank improves the heating system flexibility and acts as a hydraulic separator of the system circuits. It provides an excellent combination of the following heat sources:

  • Solid fuel boiler
  • Biomass boiler
  • Pellet boiler
  • Fireplace with a water jacket
  • Thermal pump
  • Gas-fired boiler
  • Electric boiler

Can be used with any heat source:

Gas-fired boiler

Solid fuel boiler

Pellet boiler

Electric boiler

Biomass boiler

Fireplace with a water jacket

Solar collector

The tank insulation is performed using NOFIRE technology with 70 mm thick, 100% recyclable polyester (which is an environmentally friendly material) with a high R-value and B-s2d0 high fire-resistance class in accordance with the European EN 13501 requirements

On the outside, the standard design tanks with a volume of up to and including 5000 l are protected by plastic covering.  

Optional availability of tank modification according to a customer drawing (location of connection pipes, flanges, connection diameters, type and thickness of insulation), which is calculated individually.

1.The AT series tank is designed for use in heating systems!

2. The heat storage tank is designed for operating temperatures ranging from +2 to +95 °C using water, aqueous-glycol solutions as well as alcohol ones.

3. All models in this series have the following design features:

A) The tanks are made of durable stainless steel and are designed for long-time running.

B) The lower support for the tank is based on the ring bearing principle, allowing the tank weight to be evenly distributed on the floor surface and ensuring stability.

C) All tanks are equipped with inlet and outlet fittings made from a seamless, thick-walled pipe.

Для полного просмотра таблицы характеристик листайте вправо-влево

Parameters   ET – 300 ET – 500 ET – 750 ET – 1000 ET – 1200 ET – 1500 ET – 2000 ET – 3000 ET – 5000
Volume   liters 295 485 703 995 1200 1525 2030 3540 4910
Height   Н, mm 1570 1605 1630 2205 2020 2370 2100 2260 3010
Diameter with insulation mm 630 780 920 920 1080 1080 1350 1630 1630
with insulation  mm 500 650 790 790 940 940 1220 1500 1500
Tank operating pressure MPa 0,3 0,3 0,3 0,3 0,3 0,3 0,3 0,3 0,3
Maximum operating temperature °C 95 95 95 95 95 95 95 95 95
Daily power loss W 240 400 560 810 970 1220 1620 2440 4070
Mass   kg 65 87 103 131 174 200 246 450 615

S-TANK installation and operating instructions

Download PDF

Product Catalog

Download PDF

Technical Data Sheet

Download PDF

Revit model

Download PDF