Scope of use: accumulation and storage of hot sanitary water from a thermal pump or high-capacity boilers.

Product material: AISI 304 stainless steel

The SS-HP series tank has one very important feature for use with thermal pumps. The heat exchanger of this tank is much larger than that of a regular indirect heating tank. What is the purpose of this? In fact, the thermal pump, when discharging the heat it produces through the condenser, has one very important parameter, such as the temperature difference at the condenser input and output and, as a rule, in all modern heat pumps it ranges from 5 to 10°C. When this parameter is not met, the thermal pump will not provide the heating capacity and electricity consumption parameters declared by the manufacturer, and there can also be high-pressure failures in the heat pump. Therefore, the heat exchanger in our tank has a large inner diameter of 27 mm, ensuring its low friction loss and a large heat exchange area of 10 m2 (optionally, more than 10 m2 can be ordered). The heat exchanger for the thermal pump should be selected based on the ratio of 1 kW capacity to 0.25 m2 of heat exchanger area. For example, the heat exchanger area for a 10 kW thermal pump should be 10 x 0.25 = 2.5 m2.

The tank also has a 1 1/2″ or 2″ diameter hole for electric heater installation, which may be necessary to prevent Legionella contamination.